replacing beer line on Danby kegerator beer tower

OK, I have it all put back together with the cooltower installed. Here's some pics:
[/URL][/IMG]


The fan unit is held in place with heavy duty velcro on the bottom and side:

[/URL][/IMG]

I bought some adhesive clamps to help route the hose:



To route the power into the unit, I drilled a hole big enough for the jack into the plastic liner of the gas line hole. Then I filed a notch into the unit so that the wire could run adjacent to the cylinder of the liner:



The hose runs almost to the top of the tower:

 

Well done to our new friend! The install is clean and I think you will see many benefits and positive results.

You earned a beer (or three)!

 

Thanks to you all for the helpful advice. Next step is to get a 5 gal bucket 'o water in there and tweak the temps. Then I'll be ready for my next keg. I'm hoping I can get a keg of TG pseudo sue, but it's a long shot. In the past TG kegs have been distributed to bars only.