Hi I was wondering if anyone has had experience with a system like this or similar. Pro and Cons would be much appreciated.
Welcome to the BA site, Hophaus, and to the Homebrewing forum. Can you give us a little more info about this system, a link to a website, etc. I doubt that few if any members in this forum has experience with this system because it appears to go beyond the typical homebrewing level. With some additional information you'll probably get some opinions about its features, etc. but maybe no first-hand experience. You could try asking your question at probrewer.com for some feedback.
Courtesy of Google Images reverse image search, I found it here: https://www.alibaba.com/product-detail/2HL-home-brew-beer-kit-home_934016456.html Pros? It looks nice in photos. Cons? IDK, but I'd be mighty apprehensive about sending a 40% deposit to China for a $15k - $30k (which is it?) "home brew kit". And, fwiw, 2 hL = 200 L (not 100).
I do a lot of trade with various companies in China, so dealing with China isn't a problem for us as we have people on the ground over there. This unit is $5000USD, basically a nano version of a micro setup. I was just enquiring if anyone's had experience brewing in a 50L size with a similar or exact setup.
2HL Beer equipment standard configuration system Specification Daily output 2HL beer per day, 12-15 days fermentation period Total water content 1t per day Raw material consumption Malt: 40 KG, Hops: 0.12KG, Yeast: 0.2KG. Floor area 25square meters approx Cooling System The heat exchanger & refrigeration unit Material: Inner: SUS 304, 2.5mm; External-Jacket: red copper (Wire-drawing/mirror polish plate), 1.5mm; Cylinder-(Oval, red copper), 2.5mm. Platform with handrails Inner surface treatment: welds grinded to Ra 0.6µm.CIP omni cleaning ball Insulation: Polyurethane-thickness 80 mm. Equip with : Mash agitate machine with reduction gearbox Fermentation tank Material: Inner: SUS304, 2.5mm; External-Jacket: SUS 304, Oval head cone bottom, thickness: 1.5mm. Inner surface treatment: welds grinded to Ra 0.4µm (attached omni cleaning ball). Glycol cooling system Insulation: Polyurethane-thickness 80 mm. Equip with: cone 60-75°resist compression design PLC control system & Digital display control table Plate type heat exchanger
