Got a kegerator recently from Perlick. Came with everything you need (except the beer) and is working great. Two taps. It came with 2 low-profile D-type couplers, which has been fine so far, but I want to be able to get some Ayinger, Hoegarden, etc. going, so I need an A-type coupler. What is the lowest-profile A coupler out there. I'm concerned because There are only about 3.5" from the top of a 1/6 keg to the ceiling of the fridge.
You may also want to check on the keg sizes, chances are they use a European keg (50L or 20L) which is going to be different than your current kegs that utilize the D couplers. You should check height for the couplers as well as diameter to make sure you can fit side by side in there also.
