Advices needed on Brewing Equipment!

Discussion in 'Homebrewing' started by KbKampot, Sep 29, 2019.

?

Will this brewing equipment be easy to fix and get back running?

  1. Yes

    0 vote(s)
    0.0%

  2. No

    0 vote(s)
    0.0%

  3. Yes, but tricky

    2 vote(s)
    100.0%
Thread Status:
Not open for further replies.
  1. KbKampot

    KbKampot Initiate (0) Jun 29, 2019

    Hi Peeps!


    We are planning to set up a Microbrewery in Cambodia and we got in touch with a local brewer. This guy use to run a brewery and now he has pretty much a whole setup for sale.


    I would like you guys to tell me what you think about those gears (Cf. pictures below).


    The set-up we would be interested to buy from him would be 6 x 500Lt fermentations Tanks, 1 Lauter Tun, 1 Cooler and we would get the rest elsewhere.


    All those gears come from Vietnam from the Company TRUONG TIN.


    But he had as well 1000 Lt tanks that we would not be interested in to start.


    So my main question is, what do you think about the quality of this equipment?


    Do you think that would be easy to clean, renovate, rebuild and get running or?


    (The pictures are from 500Lt and 1000Lt tanks as well since the point is to learn more about how easy it would be to put back on tracks and running…


    Another point is all the gears are left outside which is obviously not the best.


    Thank you so much to all the brewers out there for your advices!



    Love and hops.



    Thomas.
     
    #1 KbKampot, Sep 29, 2019
  2. KbKampot

    KbKampot Initiate (0) Jun 29, 2019

    #2 KbKampot, Sep 29, 2019
  3. PapaGoose03

    PapaGoose03 Grand High Pooh-Bah (6,057) May 30, 2005 Michigan
    BA4LYFE Society Pooh-Bah

    Welcome to the BA site, KbKampot. You might get a few replies to your thread in this homebrewing forum (there are just a few commercial brewers who contribute here who would be able to comment on a brewing system of that size), but I'll suggest that you also try probrewer.com if you haven't already done so. Good luck.
     
    #3 PapaGoose03, Sep 29, 2019
    pweis909 and billandsuz like this.
  4. Brewday

    Brewday Zealot (721) Dec 25, 2015 New York

    I would buy them if you get them really cheap.Pay close to scrap metal prices in case they can't be fixed. That's some bad rust and it may come back even after a acid bath. I'm surprised they don't clean them up.
     
    #4 Brewday, Sep 29, 2019
Thread Status:
Not open for further replies.