Brewing with Coconut

Discussion in 'Homebrewing' started by premierpro, Oct 16, 2015.

Thread Status:
Not open for further replies.
  1. premierpro

    premierpro Savant (1,060) Mar 21, 2009 Michigan

    Planing to brew five gallons of porter with toasted Coconut and have a couple of questions.

    1. Does Coconut float in wort?
    2. How much Coconut in five gallons?

    Thanks for your help!
    Take care.
     
  2. CADETS3

    CADETS3 Initiate (0) Dec 3, 2014 Texas

    You're probably going to need a lot of coconut. You could try making a 1 gallon experiment adding different amounts to each gallon and see what you really like. That's really the best route to take, in my opinion.
     
    premierpro likes this.
  3. GormBrewhouse

    GormBrewhouse Pooh-Bah (2,111) Jun 24, 2015 Vermont
    Pooh-Bah

    I toast my own coconut and use 1 coconut per batch. I use it in the secondary and it will foals some at first but most will fall after 5_6 days.
     
    premierpro likes this.
  4. Slatetank

    Slatetank Grand Pooh-Bah (3,713) Oct 9, 2006 Pennsylvania
    Pooh-Bah

    Yeah it floats I used a small nylon bag in a corny with marbles to weigh the nut flakes down when I did mine.
     
    Tgmckinn and premierpro like this.
  5. anteater

    anteater Pooh-Bah (1,936) Sep 10, 2012 Oregon
    Pooh-Bah Trader

    I toasted 7oz coconut flakes at 325 for 10 minutes or so and added it to 2.5 gal of imperial stout. I am very happy with the amount of coconut flavor. However, use a hop bag!!! I tossed it all in on its own, it floated at first and then settled. It was a huge pain to keep coconut flakes from clogging my siphon. It also soaked up a decent amount of my beer.
     
    premierpro and boothbeer like this.
  6. stealth

    stealth Pooh-Bah (2,023) Dec 16, 2011 Minnesota
    Pooh-Bah

    To avoid the cursed 'shit soaked up my beer' issue soak the coconut in vodka for a few weeks, mix it with a little brown sugar (to soften the vodka harshness and make the coconut flavor pop more), boil it a bit to lose some alcohol if you want, then add it to the beer. Get the same effect without any beer volume loss.
     
    Tgmckinn, pweis909, jkane101 and 2 others like this.
  7. premierpro

    premierpro Savant (1,060) Mar 21, 2009 Michigan

    Thank you for your input. Sounds like a pound should be plenty.
     
  8. chipawayboy

    chipawayboy Pooh-Bah (2,181) Oct 26, 2007 Massachusetts
    Pooh-Bah Trader

    Wow. Didn't expect to see that answer in this thread. The vodka doesn't impart flavor in the beer? You've actually tried this with success? Curious as I just brewed a choco coconut stout and am also contemplating what to add when. Thx and cheers.
     
  9. MrOH

    MrOH Grand Pooh-Bah (3,995) Jul 5, 2010 Virginia
    BA4LYFE Society Pooh-Bah

    Good vodka doesn't taste like anything but smooth booze. You pay for what you get. @stealth doesn't mind putting money or work into his brews, so I'm sure he's using rapper-level vodka to do this.
     
    Oopssorryy, stealth and GormBrewhouse like this.
  10. stealth

    stealth Pooh-Bah (2,023) Dec 16, 2011 Minnesota
    Pooh-Bah

    I like to do 'tinctures' and add them to beers I have on tap, just to see how diff ingredient combinations taste. Research for potential future brews, if you will. Coconut, hazelnust, raspberries, cashews, peppers, etc. I've done additions to the keg and fermenters with these as well. Pretty fun to experiment with. I've done a bacon infused vodka tincture before that was ridiculous in a bourbon barrel stout...just not sure if I'd want 5 gallons of it on tap..
     
    chipawayboy and GormBrewhouse like this.
  11. anteater

    anteater Pooh-Bah (1,936) Sep 10, 2012 Oregon
    Pooh-Bah Trader

    I know the vodka technique seems to work really well for a lot of people, but I've had better luck using the straight ingredients. I should probably give it another shot. I would actually be curious to try it with bourbon or rum instead though, especially with stouts that I'm planning on adding those spirits to anyway.
     
    stealth likes this.
  12. MrOH

    MrOH Grand Pooh-Bah (3,995) Jul 5, 2010 Virginia
    BA4LYFE Society Pooh-Bah

    I would wholeheartedly agree with basing a coconut tincture with quality bourbon or (especially) rum for a stout.
     
    corbmoster and anteater like this.
  13. stealth

    stealth Pooh-Bah (2,023) Dec 16, 2011 Minnesota
    Pooh-Bah

    I use vodka if experimenting with a finished batch that I have on tap, or if I am adding to a brew that I don't plan on adding bourbon,etc to, otherwise I do exactly as you describe.
     
    anteater likes this.
  14. trosefl

    trosefl Initiate (0) Jan 22, 2017

    I am interested in using the vodka tinctures technique for a porter batch and I have two questions.
    How much toasted coconut for a 2.5 gal batch?
    Should I add the tinctures at bottling time and can you give an estimate on the ratio; tinctures:beer for a mild to medium coconut flavor?
    Thanks
     
  15. MLage

    MLage Initiate (0) Sep 5, 2016 Brazil

    Just to state:

    I did an experiment where I brewed a beer and put Defatted Coconut in the boil. Then fermented it and split it into 3 batches - It was a stout:

    1) One with the original (boil) - BTW it was 0,5lb in 7 gals
    2) 1.3gal with 1.7oz of toated coconut
    3) 1.3 gal with 3.4oz of toasted coconut.

    Impressions:

    1) I could get a hint of coconut 2 weeks after bottling but it vanished in 4 weeks after I bottled
    2) Good amount of coconut 2 weeks after bottling. A little too much at first. 2 weeks later it was perfect. 1 month later started to faded.
    3) A loooooot of coconut in 2 weeks...almost a coconut beer and undrinkable. 2 weeks later it as a lot. 4 weeks later it was a little bit too much...6 weeks later it was perfect.
     
Thread Status:
Not open for further replies.