My setup is a converted keggerator into a 3 tap ball lock system with an external 10lb CO2 tank. This has a primary regulator and a Y to a secondary regulator inside the cooler. Thus 3 ball locks at 2 pressures. My Problem: after 10-14 days the CO2 tank empties. Everything is good for the first few days and the 3 ball locks all appear to be under pressure; not fully carbed but I got a solid "hiss" when I lifted the vent ring. ANY IDEAS?
Slow leak. You'll need to find it. You can do this by cranking up the pressure and spraying all the connections and seams with soapy water (or I use starsan solution because it's happends to be handy) and look for bubbling. Don't neglect the tank's own built in relief valve.
Thanks all. I figure its one of the keg lids. I have been trying to isolate the problem so time will tell.
