I bought new line for my kegerator. The trouble now is that I cannot connect the new line though the tower because the line is tight and I have no leverage. Any suggestions? Thanks.
Unscrew the shank using the nut you see when you look into the tower, pull the shank with old line attached out towards the front of the unit and detach the old line. Thread the new line into the hole (making sure you thread it through the nut on the inside of the tower or you will be doing it all over again), make the attachment to the shank outside the tower and push it back into the hole. Retighten the nut and you are done. Faucet wrench would be helpful, but pliers work too.
