Custom Mashtun Blanket

This was procured by a real good friend and I cant say how awesome this is. This goes on my Stout Tanks 40 Gallon MashTun, it is heat and flame resistant and will for sure keep that mash at a constant temp even on the coldest days.

<a href="http://s912.photobucket.com/user/bazowie/media/20140312_163453_zps46fdb5ee.jpg.html" target="_blank"><img src="http://i912.photobucket.com/albums/ac329/bazowie/20140312_163453_zps46fdb5ee.jpg" border="0" alt=" photo 20140312_163453_zps46fdb5ee.jpg"/></a>

 

Will it take the heat from my 320,000 BTU burners? If so, ill use that next time!!

 

I will try to remember to let you know how it works might be a while before I brew again.
As for the cost I'm not sure because it was a gift (and a nice one) but I'm thinking over $300, just a guess because of the material and craftsmenship.
Cheers

 

<a href="http://s912.photobucket.com/user/bazowie/media/20130330_072935_zps01febbfa.jpg.html" target="_blank"><img src="http://i912.photobucket.com/albums/ac329/bazowie/20130330_072935_zps01febbfa.jpg" border="0" alt=" photo 20130330_072935_zps01febbfa.jpg"/></a>

This is the system, the center pot is the Tun, each outside pots are HLT and BK, the larger one being the BK, this is a RIMS system.
As far as details on the blanket I cant give you any as it was a gift, I can tell you it is about 3/4" thick and weighs approx. 25 Lbs, That is all I really know. He picked up the pot when I was at work took it and had it
measured and brought it back before I got home, when it was finished he dropped it off when I was at work.
He hasn't been over to give me the skinny on the material. It is Staple sewed together.

 

Looks like it has Moobs

 

As long as it is nice and cozy ill keep it trussed up

 

Are you sure that came out right, or did you just admit to having Moobs

 

Welcome to the club, Cheers