Draft Faucet Body Gasket on the cheap

Discussion in 'Homebrewing' started by sarcastro, Sep 12, 2012.

Thread Status:
Not open for further replies.
  1. sarcastro

    sarcastro Savant (1,133) Sep 20, 2006 Michigan

    #1 sarcastro, Sep 12, 2012
  2. Naugled

    Naugled Pooh-Bah (1,944) Sep 25, 2007 New York
    Pooh-Bah

    #2 Naugled, Sep 12, 2012
  3. mikehartigan

    mikehartigan Maven (1,421) Apr 9, 2007 Illinois

    Try McMaster:
    http://www.mcmaster.com/#o-rings/=j9grx0
    All you need to do is measure the one you have, buy a bag of 100 for around $10, then, after you get it, buy another bag slightly bigger or slightly smaller because your measurement was just a hair off :wink:
    But, for the number of times you're going to need a replacement (it's really not subject to wear), a buck each is not a killer, IMO.
     
    #3 mikehartigan, Sep 12, 2012
  4. sarcastro

    sarcastro Savant (1,133) Sep 20, 2006 Michigan

    I know about mcmaster, and I was hoping someone already knew the part number.
     
    #4 sarcastro, Sep 12, 2012
Thread Status:
Not open for further replies.