Kegerator for 2 taps? - Beer and Nitro cold brew

Discussion in 'Home Bar' started by Scotch021, Oct 31, 2019.

Thread Status:
Not open for further replies.
  1. Scotch021

    Scotch021 Initiate (0) Oct 31, 2019 Florida

    Hey guys, my last kegerator died over 5 years ago and I have finally gotten over it and ready to move on and replace her.

    I am wanting to do a two tap setup, 1 for beer and 1 for nitro cold brew. I know i will have to have two tanks but does anyone run this setup and what kegerator (or at least size) do you suggest could work? Would be inside residential as I heard the BM23 gets loud?

    Assuming both tanks needs to be inside the unit at all times?

    thanks for any help!

    Joe
     
    #1 Scotch021, Oct 31, 2019
  2. DougC123

    DougC123 Savant (1,186) Aug 21, 2012 Connecticut

    Welcome to BA, I saw your question on the sleepy Micromatic site as well. It doesn’t matter where the tanks are, it has zero effect on anything, and the results will be the same.
     
    #2 DougC123, Oct 31, 2019
  3. Scotch021

    Scotch021 Initiate (0) Oct 31, 2019 Florida

    Ok awesome. Any clues on a 2tap setup that could work for both? Hoping to stay around $2K? Is BM23 quiet enough for inside?
     
    #3 Scotch021, Oct 31, 2019
  4. DougC123

    DougC123 Savant (1,186) Aug 21, 2012 Connecticut

    Whatever you get it will be like a fridge running. Bev Air and True are the kings of beer dispensing and you can be all set up for under $2k. Try the configuration tool on the Beverage Factory web site, you’ll get an idea of cost.
     
    #4 DougC123, Nov 1, 2019
Thread Status:
Not open for further replies.