Just bought a used kegerator was getting alot of foam so turned down the temperature and now i am getting nothing or a very slow pour from it does anyone know what could be going on or how i can get this kegerator working?
There is a lot more to a kegerator than just stuffing a keg in it. I'm guessing you likely froze the lines or keg. You need to study up on how to balance your system. Depending on what brand and model you bought you may also need to do a little work on it to get it up to snuff.
Agree with above.. Please state some stats. Brand of unit: What temp your pouring at: Output Psi: Type of beer:
Read these links to learn how to balance your system... http://www.homebrewersassociation.org/attachments/0000/4954/From_Flat_To_Foam-Ray_Daniels.pdf http://www.franklinbrew.org/wp/?page_id=98 And there are many carbonation charts online to help with the numbers. Or you could download the spreadsheet calculator at this link, which integrates the variables... https://drive.google.com/folderview...jMC00YmM5LTgzN2UtYmNhYzk0ZTg0YWNm&usp=sharing
I'd say if the lines are frozen, a portable bernz-o-matic can be used to thaw them out? Not if you're using a liquid propane charging agent. That would be suicidal.
