Shelving

I just replaced my shelving last Fall, and went with the following:

2 of these:

http://www.lowes.com/pd_319497-1281...87_?Ns=p_product_qty_sales_dollar|1&facetInfo=

10 of these:

http://www.lowes.com/pd_319488-1281...87_?Ns=p_product_qty_sales_dollar|1&facetInfo=

And 3/4" pressure treated plywood on each shelf. You'll also need some additional cross supports.

All in, it was about $500. The five shelves hold about 1,500 bottles of beer and you can park a small car on any one of them.

Previously, I used these:

http://www.homedepot.com/Storage-Or...splay?catalogId=10053&langId=-1&storeId=10051

These will hold 400 bottles or so, but you need to buy 3/4" plywood to replace the particle board it comes with. I recommended getting pressure treated, since even the marine grade plywood I purchased got some mildew on it after a few years of co-habitating next to my well tank. Plan on another $100 for the PT.

I also picked up 3 wine racks that are 21 bottles tall and 6 bottles wide. If you mount them properly, you gain two more rows between the sets of shelves, and can store 420 bottles. That's what I have to the left of my other shelves.

Good luck with the new build out. I organized by style when I put everything back, but everyone has their own preference.