Swap Out Robobrew Pump Attachment Hardware???

Discussion in 'Homebrewing' started by jdulb, Dec 19, 2018.

Thread Status:
Not open for further replies.
  1. jdulb

    jdulb Initiate (0) Aug 26, 2017 Indiana

    Hi all,

    I got the Robobrew about a year ago & have loved it; however, I’ve noticed that when I go to disassemble the pump arm, the tightening mechanism/nozzle (not sure the proper name) catches the top of the kettle & has started to loosen the pump attachment. I believe I have the second generation and it looks like a third generation has since been released. Looking at the attachment on the new generation, it looks like the hardware for the pump attachment has been changed. I am wondering - to anyone with the RoboBrew, is there a way to order this new hardware and attach to my current system? Could I contact the RoboBrew manufacturer directly & see if they’d be willing to send the new piece? I appreciate any feedback, thank you!
     
    #1 jdulb, Dec 19, 2018
  2. jdulb

    jdulb Initiate (0) Aug 26, 2017 Indiana

    Here are links to images of the different systems:
    - System I have (v2 I believe)
    [​IMG]

    -Newer system (v3)
    [​IMG]
     
    #2 jdulb, Dec 19, 2018
  3. PapaGoose03

    PapaGoose03 Grand High Pooh-Bah (6,057) May 30, 2005 Michigan
    BA4LYFE Society Pooh-Bah

    These brewing machines are not used by many members in this forum, so I don't know if this is the best place to come for an answer to your question. Going to the customer assistance at Robobrew is probably your best bet.

    However, here is a link to a search that I did of this forum asking for threads where Robobrew is mentioned. https://www.beeradvocate.com/community/search/75656450/?q=robobrew&o=date&c[node]=8 Maybe your answer is there, or you might be able to determine which BA members use this machine and then message them with your specific question. Good luck.
     
    #3 PapaGoose03, Dec 19, 2018
    jbakajust1 likes this.
Thread Status:
Not open for further replies.