Westvleteren wooden crate question?

Discussion in 'Breweriana' started by Lookingforbrew, Nov 22, 2016.

Thread Status:
Not open for further replies.
  1. Lookingforbrew

    Lookingforbrew Initiate (0) Dec 14, 2012 Canada (ON)

    A friend of mine is a fellow beer geek and I was thinking of making him a replica wooden Westvleteren beer case. I was wondering if any one has the dimensions or a case they wouldn't mind measuring the LWD of the case and the components i.e. the side base board widths. I have a picture of a case from beligium I took a while ago but didn't think to measure it.

    Any help is appreciated. This will be for decoration only but I would like to be as accurate as possible.

    Cheers,
     
    #1 Lookingforbrew, Nov 22, 2016
  2. zekeman17

    zekeman17 Pooh-Bah (2,082) Feb 14, 2010 Pennsylvania
    Pooh-Bah Trader

    I'll get back to you in a couple of hours with the info you want unless someone else comes through sooner.
     
    #2 zekeman17, Nov 22, 2016
  3. zekeman17

    zekeman17 Pooh-Bah (2,082) Feb 14, 2010 Pennsylvania
    Pooh-Bah Trader

    Outside dimensions---19 1/2 x 13 x 4 (in inches)
    the 4 outside boards are about 5/8" thick, the inner slats are about 3/8".
    Each square where the bottles would sit are 2 3/4" square.
    Message me if you have any other questions.
    Good luck--post a pic of the finished product here if you get a chance.
     
    #3 zekeman17, Nov 22, 2016
    PaulQuinn and blue-dream like this.
Thread Status:
Not open for further replies.